 |
Electromedical Equipment 3 Phase 380V 400V Low Frequency UPS 100KVA
Product Details:
| Place of Origin: | China |
| Brand Name: | ZGDUPS |
| Certification: | CE |
|
Detail Information |
|||
| Rated Voltage: | 380/400/415 Vac Three-phase | Frequency Range: | 45-65Hz |
|---|---|---|---|
| Protection Degree: | IP20 | Efficiency Smart Mode: | Up To 98% |
| Capacity: | 8KW 12KW 16KW 24KW 32KW 48KW 64KW 80KW 96KW 128KW 160KW | Power: | 10KVA 15KVA 20KVA 30KVA 40KVA 60KVA 80KVA 100KVA 120KVA 160KVA 200KVA |
| High Light: | 400V Low Frequency UPS,Electromedical Equipment Low Frequency UPS,100KVA Industrial UPS Power Supply |
||
Product Description
3 Phase 380V 440V Low Frequency Ups 100KVA Industrial Ups Power Supply
The ZGD330 uses on-line double conversion technology (VFI) with isolation transformer on the inverter output.
It is supplied with Watch & Save 3000 software as standard and can be remotely monitored
using the Power Net Guard system from anywhere in the world. Additional battery extension packs allow the standard battery routine to be extended up to several hours.
Minimum impact on supplies easy sources:
Input current distortion <4% for the ZGD330 with filter with sinusoidal absorption to remove the risk of resonance with other input supply users or phase shift capacitor sets. The absorbed current distortion is independent of input supply parameters such as impedance. This enable ZGD330 to deliver maximum performance levels regardless of the installation environment. With these input features ZGD330 can achieve significant savings in terms of sizing and power supply sources isolation transformers and generators over less sophisticated power systems.
Maximum battery care:
Battery deep discharge protection;
Temperature compensating charger;
Built-in automatic and manual battery test feature.
Simple to install:
Capability to install the UPS into any distribution system(neutral not required on rectifier input);
Capability to separate the rectifier/bypass power networks and to power these from two separate sources, without Galvanic isolation (Necessary on UPS without an output transformer).
High reliability:
Extremely high short-circuit current to ensure compatibility with the most difficult transformer applications (lighting, drives and industrial processes) and an isolation transformer on the inverter output;
Full microprocessor control with no-break static and manual bypasses;
IGBT technology.
Other characteristics
0.8 power factor make ZGD330 suitable for powering ICT and Industrial loads;
High level diagnostics: event log with 128 messages, states, measurements and alarms - available from the built-in LCD with several languages;
